Tetraethoxysilane-40 (CAS 11099-06-2, Ethyl Polysilicate / Ethyl Silicate 40) is oligomeric ethoxysilicate with 40~42% silica content, widely used as binder for zinc-rich primer, investment casting refractory and sol-gel silica coating.
Chemical Name: Tetraethoxysilane-40
Synonyms: Ethyl Silicate 40, Ethyl Polysilicate, Silicic acid, ethyl ester
CAS NO: 11099-06-2
EINECS Number: 234-324-0
Average Chemical Formula: C24H60O16Si5
Average Molecular Weight: ~745 g/mol
Product Type: Oligomeric ethoxy-terminated polysiloxane, silica precursor, inorganic binder
|
Item |
Specification |
|
Appearance |
Colorless to pale yellow clear homogeneous liquid |
|
SiO₂ Content |
40.0–42.0 wt% |
|
Density (25 ℃, g/cm3) |
1.05-1.07 |
|
Flash point |
≥62 ℃ |
|
Free ethanol |
≤0.5 wt% |
|
Boiling point |
160 ℃ |
|
Pour Point |
≤ -40 ℃ |
Description:
Tetraethoxysilane-40 (CAS 11099-06-2) is oligomeric ethyl polysilicate, produced by controlled partial hydrolysis and polycondensation of tetraethoxysilane monomer. It is a mixture of linear, branched and cyclic ethoxy-capped siloxane oligomers, not pure monomer TEOS.
Under acid or base catalysis and humid conditions, ethoxy groups hydrolyze and release ethanol, then condense to form a continuous rigid silica network. Compared with monomer tetraethoxysilane (TEOS, CAS 78-10-4), this grade provides higher silica yield, lower VOC, faster film formation, lower curing shrinkage and better high-temperature resistance of cured silica film.
Core advantages: High silica loading, low volatile content, controllable gel time, excellent compatibility with solvent-borne resins, high heat resistance of cured inorganic silica coating.
Application:
Packaging: 25 kg can, 200 kg HDPE drum, IBC tank. Custom packaging available.
Storage: Cool, dry, airtight, moisture-proof warehouse. Storage temperature: 5–30 ℃. Keep tightly sealed at all times. Isolate from water, moisture and alkaline materials.
Shelf Life: 12 months for unopened original packaging. Consume rapidly once opened.