Perfluoromethyl vinyl ether (PMVE, CAS 1187-93-5) is high‑purity flammable liquefied compressed perfluorinated vinyl‑ether comonomer. Mainly used for manufacturing FFKM/FKM fluoroelastomers and modified fluoropolymers; delivers outstanding low‑temperature elasticity and sealing performance for high‑end sealing components.
Chemical Name: Perfluoromethyl vinyl ether
Synonyms: PMVE, Perfluoro(methyl vinyl ether), Trifluoromethyl trifluorovinyl ether, 1,1,2‑trifluoro‑2‑(trifluoromethoxy)ethene
CAS NO: 1187-93-5
EINECS Number: 214-695-4
Formula: C₃F₆O
Molecular Weight: 166.02 g/mol
Product Type: Liquefied flammable compressed fluoromonomer gas, fluoropolymer comonomer
Product Grade: Polymer‑Grade / High‑Purity Research Grade
|
Item |
Specification |
|
Appearance |
Colorless liquefied compressed gas |
|
Purity (PMVE main component) |
≥99.5 wt% |
|
Fluorinated olefin impurities |
≤0.4 wt% |
|
Density (25 ℃, g/cm3) |
1.43 |
|
Boiling Point |
‑23 ℃ |
|
Melting Point |
‑155 ℃ |
Description:
Perfluoromethyl vinyl ether (PMVE, CAS 1187-93-5) is a perfluorinated vinyl‑ether monomer supplied as colorless liquefied flammable compressed gas in high‑pressure steel cylinders. It is widely used as copolymerization co‑monomer with tetrafluoroethylene (TFE).
PMVE gas is heavier than air and may spread along ground to distant ignition sources. Under anhydrous conditions it shows good chemical inertness; in presence of free‑radical initiators or excessive heating, spontaneous exothermic polymerization may occur. Liquid PMVE contact may cause frostbite. No heavy‑metal impurities. It introduces flexible perfluoromethoxy side‑chains to fluoropolymer backbone, improving low‑temperature elasticity, sealing performance and chemical resistance of fluoroelastomers and modified fluoroplastics.
Core advantages: High copolymerization reactivity with TFE; zero ODP, very low GWP; significantly improves low‑temperature flexibility and sealing property for fluoroelastomer; excellent chemical resistance for derived polymer.
Application:
Packaging: High‑pressure steel cylinder (typical fill: 5 kg, 10 kg, 40 kg; custom filling available). Cylinders fitted with certified pressure‑relief safety device.
Storage: Store compressed gas cylinders in cool, well‑ventilated explosion‑proof gas warehouse. Recommended storage temperature ≤20 ℃. Keep away from heat sources, direct sunlight, open fire, strong oxidants and radical initiators. Cylinders must be secured upright with chain / bracket. Keep valve tightly closed when not in use.
Shelf Life: 12 months for unopened original cylinder under standard storage conditions. After partial consumption, seal valve tightly and consume within 6‑9 months under inert‑gas protection to avoid unintended polymerization and impurity formation.