• Octylmethyldiethoxysilane,YCHEMIR,Octylmethyldiethoxysilane-YCHEMIR
  • Octylmethyldiethoxysilane,YCHEMIR,Octylmethyldiethoxysilane-YCHEMIR

Octylmethyldiethoxysilane

No.2652-38-2

Octylmethyldiethoxysilane (CAS 2652-38-2) is high‑purity difunctional long‑chain alkyl diethoxysilane, colorless clear liquid. Difunctional silane for controlled hydrophobic modification, provides soft low‑surface‑energy films with good slip performance, widely used for filler treatment and silicone modification, slower hydrolysis than methoxy counterparts.

Download
View all downloads
  • Octylmethyldiethoxysilane,YCHEMIR,Octylmethyldiethoxysilane-YCHEMIR

Description

Chemical Name: Octylmethyldiethoxysilane

Synonyms: Methyloctyldiethoxysilane, Diethoxy(methyl)octylsilane

CAS NO: 2652-38-2

Chemical Formula: C₁₃H₃₀O₂Si

Molecular Weight: 246.46 g/mol

Product Type: Difunctional long‑chain alkyl alkoxysilane, surface hydrophobing modifier, silicone modifier, sol‑gel precursor

Item

Specification

Appearance

Colorless clear liquid

Purity

≥96.0 wt%

Density (25 ℃, g/cm3)

0.848

Viscosity

~2.0 mPa·s @25 ℃

Flash point

110 ℃

Boiling point

82 ℃ @ 2 mmHg

Freezing Point

<‑40 ℃

Description:

Octylmethyldiethoxysilane (CAS 2652-38-2) is a difunctional long‑chain alkyl diethoxysilane, colorless transparent liquid at ambient temperature. The silicon atom carries one linear n‑octyl hydrophobic chain, one methyl group and two hydrolyzable ethoxy groups. Under acid or base catalysis, ethoxy groups hydrolyze and release ethanol, generating silanol groups for condensation.

This product is moisture‑sensitive and will hydrolyze gradually when exposed to humid air, so it must be stored tightly sealed. Compared with trifunctional octyltriethoxysilane, this difunctional silane cannot form dense 3D crosslinked networks, and produces softer, low‑brittleness hydrophobic films with excellent slip property. The ethoxy group brings moderate hydrolysis rate and better process controllability than methoxy analogues. No heavy‑metal impurities.

Core advantages: Difunctional controlled crosslinking, soft hydrophobic coating, low surface friction, good compatibility with polyolefin and non‑polar polymers, low curing shrinkage, low volatility.

Application:

  • Filler & Inorganic Powder Surface Modification Hydrophobic treatment of silica, talc, calcium carbonate, glass beads and mineral fillers; improves dispersion in PP, PE, rubber and thermoplastic systems, reduces water absorption and enhances surface slip.
  • Silicone Fluid & Silicone Resin Modifier Introduce long‑chain octyl alkyl groups into silicone backbone, improve compatibility with polyolefin, enhance hydrophobicity and surface lubricity.
  • Controlled Hydrophobic & Anti‑slip Coatings Precursor for soft hydrophobic, easy‑clean coatings where high crosslinking and hard film are not required.
  • Release & Slip Additive Low surface energy additive for plastic processing, rubber and coating formulations to improve demolding performance.
  • Sol‑gel Hybrid Material Research Precursor for linear siloxane oligomers and organic‑inorganic hybrid materials.

Packaging: Lab scale: sealed amber glass bottle / steel can (100 g / 500 g /1 kg); bulk: 5 kg / 20 kg sealed moisture‑proof steel drum. Custom packaging available on request.

Storage: Store in cool, dry, well‑ventilated warehouse for flammable liquids. Keep containers tightly sealed to exclude atmospheric moisture and prevent premature hydrolysis. Recommended storage temperature: 5‑25 ℃. Keep away from heat sources, open flame, direct sunlight, strong acids and strong bases. Inert‑gas‑blanketed storage preferred for long‑term preservation.

Shelf Life: 12 months for unopened original sealed packages under standard storage conditions. Seal tightly immediately after opening and consume within 2 months to guarantee purity and avoid oligomer formation.