3‑Methoxyperfluoro(2‑methylpentane) / HFE‑7300 (CAS 132182‑92‑4) is medium-boiling non-flammable hydrofluoroether solvent with low surface tension. Widely used for precision electronic cleaning, dielectric insulation, thermal transfer and vacuum leak detection.
Chemical Name: 3-Methoxyperfluoro (2-methylpentane)
Synonyms: HFE‑7300, Methoxy perfluoro‑2‑methylpentane
CAS NO: 132182‑92‑4
EINECS Number: 603‑567‑7
Formula: C₇H₃F₁₃O
Molecular Weight: 352.07 g/mol
Product Type: Medium boiling hydrofluoroether, inert fluorinated solvent, dielectric heat transfer fluid
Product Grade: Industrial Grade / Electronic Semiconductor Grade
|
Item |
Specification |
|
Appearance |
Colorless transparent liquid |
|
Purity |
≥99.5% |
|
Density (25 ℃, g/cm3) |
1.590 |
|
Acidity (as HF) |
≤1.0 ppm |
|
Boiling point |
97~99 ℃ |
|
Melting Point |
‑85~-30 ℃ |
|
Refractive index (25℃) |
1.286 |
Description:
3‑Methoxyperfluoro(2‑methylpentane) (CAS 132182‑92‑4, HFE‑7300) is a high purity branched hydrofluoroether. It is an environmentally friendly substitute for CFC, HCFC and perfluorocarbon solvents. This liquid is colorless, low odor, non-flammable, with low surface tension and good wetting performance. It has excellent chemical inertness and will not swell or corrode most metals, engineering plastics and fluoropolymers. Its moderate boiling point balances evaporation rate, reduces operating loss, and leaves no residue after full volatilization, meeting strict cleanliness requirements for semiconductor and precision electronics manufacturing.
Core advantages: Low surface tension, moderate boiling point, non-flammable, zero ODP, excellent material compatibility, rapid evaporation without residue, good dielectric properties.
Application:
Vapor degreasing, immersion and ultrasonic cleaning of PCBs, optical parts, sensors, semiconductor components; removes fine particles, light grease and residual flux without damaging precision plastic and rubber components.
Dielectric fluid for high voltage electrical insulation test and power electronic component testing.
Closed-loop precision temperature control fluid for electronic thermal cycling test equipment.
Tracer fluid for leak detection of vacuum pipelines, micro-valves and sealed devices.
Inert bath solvent and fluorine chemistry research solvent.
Packaging: 1kg /5kg /25kg /50kg sealed steel drum; small laboratory packaging available.
Storage: Store in cool, dry, ventilated chemical warehouse. Keep container tightly sealed to prevent volatilization. Recommended storage temperature:5~30℃. Keep away from direct sunlight, high temperature heat sources and strong oxidants.
Shelf Life: 24 months for unopened original sealed package under standard storage conditions. Seal tightly after opening and use in time.