• 2,4,6,8-tetramethyl-2,4,6,8-tetrakis[3-(oxiranylmethoxy)propyl]cyclotetrasiloxane,YCHEMIR,2,4,6,8-tetramethyl-2,4,6,8-tetrakis[3-(oxiranylmethoxy)propyl]cyclotetrasiloxane-YCHEMIR
  • 2,4,6,8-tetramethyl-2,4,6,8-tetrakis[3-(oxiranylmethoxy)propyl]cyclotetrasiloxane,YCHEMIR,2,4,6,8-tetramethyl-2,4,6,8-tetrakis[3-(oxiranylmethoxy)propyl]cyclotetrasiloxane-YCHEMIR

2,4,6,8-tetramethyl-2,4,6,8-tetrakis[3-(oxiranylmethoxy)propyl]cyclotetrasiloxane

No.60665-85-2

2,4,6,8-Tetramethyl-2,4,6,8-tetrakis[3-(oxiranylmethoxy)propyl]cyclotetrasiloxane (CAS 60665-85-2, CS-697 / D4E4) - a colourless to pale yellow, high-boiling tetraepoxy functional cyclotetrasiloxane, EEW 175 – 190 g/eq, epoxy value 0.55 – 0.57 mol/100 g, viscosity 100 – 250 mPa·s. Four glycidoxypropyl groups on a rigid D4 siloxane core deliver high crosslink density with very low cure shrinkage, plus the heat, moisture and electrical resistance of silicone. It cures with amines, anhydrides, phenolics or cationically/UV, and is used to modify epoxy resins, upgrade LED and electronic encapsulants, solder masks, UV hard coats, composite interfaces and high-temperature structural adhesives. It contains no hydrolyzable alkoxy groups, so it does not release alcohol or react with water — combine with a hydrolyzable silane when direct glass/metal bonding is required.

Download
View all downloads
  • 2,4,6,8-tetramethyl-2,4,6,8-tetrakis[3-(oxiranylmethoxy)propyl]cyclotetrasiloxane,YCHEMIR,2,4,6,8-tetramethyl-2,4,6,8-tetrakis[3-(oxiranylmethoxy)propyl]cyclotetrasiloxane-YCHEMIR

Description

Chemical Name: 2,4,6,8-tetramethyl-2,4,6,8-tetrakis[3-(oxiranylmethoxy)propyl]cyclotetrasiloxane

Synonyms: Tetrakis(propyl glycidyl ether)cyclotetrasiloxane; tetramethyltetrakis(glycidoxypropyl)cyclotetrasiloxane; polyglycidyl ether cyclosiloxane; CS-697; D4E4; EPC4

CAS NO: 60665-85-2

EINECS Number: 262-360-7

Chemical Formula: C₂₈H₅₆O₁₂Si₄

Molecular Weight: 697.08 g/mol

Product Type: Cyclotetrasiloxane (D4) bearing four methyl and four glycidoxypropyl groups; tetrafunctional aliphatic epoxy, no hydrolyzable alkoxy groups

Item

Specification

Appearance

Colourless to pale yellow clear liquid

Purity (by GC)

≥ 95.0 % (industrial grade); 90 % reagent grade also supplied

Density (25 ℃, g/cm3)

1.13

Flash point

≈ 200 °C

Boiling point

> 250 °C

Description:

A cycloaliphatic-type tetraepoxy functional cyclotetrasiloxane. Four glycidoxypropyl side chains are attached to a rigid D4 (Si₄O₄) ring, each silicon carrying one methyl group. The molecule therefore combines a thermally and chemically stable siloxane core with four reactive aliphatic epoxy groups in a single, low-molecular-weight (≈ 697) building block.

Key features:

  • Four epoxy groups per molecule — high crosslinking density per unit mass; EEW ≈ 175 – 190, one of the highest epoxy values among siloxane coupling/modifying agents
  • Very low cure shrinkage — the cyclic, rigid core offsets the volume contraction typical of densely crosslinked epoxy networks
  • No hydrolyzable groups — does not consume water, does not release alcohol or acid, no silanol condensation step; stable in neutral aqueous and solvent-borne systems
  • Siloxane backbone benefits — heat resistance, low-temperature flexibility, hydrophobicity, moisture resistance, low surface energy, good electrical properties
  • Cures by the same routes as epoxy resins — amines, anhydrides, carboxylic acids, phenolics, and cationic/UV photoinitiation
  • Compatible with epoxy, phenolic, acrylic, polyurethane and silicone-epoxy hybrid systems; acts as reactive diluent/modifier at low addition levels

Application:

  • Epoxy resin modification: raises crosslink density, Tg, modulus, heat resistance, chemical resistance and hydrophobicity while limiting cure shrinkage; used in structural, casting and laminate epoxy systems
  • Electronic packaging: LED encapsulants, chip underfill, potting compounds, high-temperature PCB solder masks, semiconductor adhesives — improves adhesion to gold, copper, ceramic and FR-4 while resisting thermal cycling and reflow
  • Coatings and inks: UV-curable hard coats for 3C surfaces, automotive high-temperature clear coats, anti-fouling and corrosion-resistant coatings; adhesion promoter and crosslinker combined
  • Composites: carbon/glass fiber sizing and prepreg interface modification; improves interlaminar shear strength and fiber–matrix bonding
  • Adhesives and sealants: high-temperature structural adhesives, electronic potting adhesives, silicone rubber tackifiers; improves wet adhesion and water resistance
  • Silicone chemistry building block: precursor for linear epoxy-modified polysiloxanes with controllable epoxy content, amino-silicone softeners, and acrylate-functional UV-curable silicones (via acrylic acid ring-opening, which also generates adhesion-promoting hydroxyl groups)
  • Hybrid/flame-retardant systems: co-modifier with DOPO-type phosphorus phenolics for halogen-free flame-retardant epoxy

Packaging: 25 kg / 25 L pail, 200 kg drum, 1000 kg IBC; fluoride-lined or epoxy-phenolic lined steel/plastic drums recommended. Sample sizes 100 g - 1 kg in plastic bottles.

Storage: cool (2-8 °C recommended for long-term, or below 25 °C for industrial warehousing), dry, dark, well-ventilated; keep containers tightly closed under nitrogen if possible.

Shelf Life: 12 months from shipment in unopened original containers; verify epoxy value (EEW) before use after extended storage.